2023/02/10
0
There are more and more discarded cement blocks left by house demolition, and these cement blocks are piled up on the construction site, taking up a lot of space. But after the construction of the building was completed, these discarded cement blocks disappeared? Where are they?
Of course, these cement stones are not discarded, but have been processed and reused. The uses of cement blocks are very extensive. It can be used to produce coarse and fine aggregates, used to produce concrete and mortar with corresponding strength levels, or to make building materials such as blocks, wall panels, floor tiles, etc. The slag contained in the cement blocks can also be used for road construction and the like.
The reuse space of cement blocks is so large that a series of cement block processing industries have been born. The process of processing waste cement blocks is similar to the manufacturing process of natural aggregates, that is, the waste cement blocks are crushed through reasonable combination of crushing equipment, screening equipment, and conveying equipment, so as to realize the reuse of renewable resources.
Among them, crushing equipment plays the most critical role. The equipment on the market is usually relatively large in size, and the cement blocks need to be transported to the processing plant for processing. This method has high crushing efficiency, but the cost is relatively high. It is more appropriate if the amount of cement stones to be processed is relatively large. For Boss Wang from Anhui, it feels like killing a chicken with a sledgehammer.
Boss Wang's construction site has some cement blocks left over from the demolition, and he has always wanted to dispose of them and use them for backfilling the roadbed. But Boss Wang felt that it would be very troublesome and costly to load the cement blocks away, break them, and then pull the gravel back. He wanted to find a device that could be broken on site. So after many comparisons, the equipment of the crusher bucket was chosen.
The crusher bucket is bucket-shaped and has a jaw plate installed at the bottom. It is usually installed on an excavator, and it can also be installed on other equipment with a hydraulic system. Compared with large crushers, the crusher bucket is very small in size and easy to transport. It can be transported to the construction site for on-site crushing of cement stones. Of course, there is no way to compare the crushing efficiency with the crusher, but the advantage of on-site backfilling after crushing in situ is also incomparable with the crusher. What's more, after improvement, the crushing capacity of the crusher bucket has reached 50-80 cubic meters per hour, which is very impressive!
Boss Wang from Anhui was full of expectations for the crusher bucket. After the equipment arrived at the construction site, he set off firecrackers to celebrate. Fortunately, the crusher bucket did not live up to his expectations. After it was modified on the excavator, it started to work. The crushing effect made Boss Wang overjoyed!
